技 术 参 数

激光发生器

4000Watt

切割范围

3000x1500mm

切割厚度:  钢板:

25mm

                   不锈钢板:

14mm

铝板:

10mm

地面上工作台高度

900mm

最大工件承重

930kg

X轴/ Y轴/ Z轴行程

3235x1545x100mm

-Velocity of moves:

X:     24m/mm

Y:      24m/mm

Z:     25m/mm

-Velocity of cut (m/min): 15

-Axis controlling systems, X and Y:

slave of axis through servo digital motor and ball screws.

-Lubrication: automatic centralized for X and manual greasing for Y axis

-Axis controlling system for Z axis:

                            through servo digital motor and straps

-Lubrication Z: manual

-Positioning precision (mm): X , Y and Z axis:+/- 0,01/500

-Repeatability:  +/- 0,005

-CUTTING HEAD equipped with a 7,5” (190,5mm) lens

-Profile follower Z axis: capacitive 

-Work piece supports:  interval 50mm

-scrap conveyer : in movement under table

-Light: 68 w  lamp permits to light up the cutting zone

-Automatic Gas changer: 3 types of gas

                                               Service pressure:0,5 to 6,0 kg/cm²

                                               Alimentation pressure: 8,0kg/cm²

                                               Oxygen, air, 3’d gaz : 0,1kg/cm²                  

-Gas pressure is controlled by the CNC:

the assistance gas pressure is programmable

the service pressure: Max 6,0kg/cm²

-Function of adaptive power: Power of lazer is adapted to the speed of cutting

-Weight machine with cooler: 13 900kg per machine

Technical specifications for the FMS system

-Dimensions of the sheet metal:  1500 (+0,+8)x 3000 (+0,+15)mm

-Thickness: 0,8-22mm

-Max stocking height: 130mm

-weight per hut: 3 tons

-Max charge :30 ton

-speed of vertical move : 6,5m/min

-speed of move:14mm/min

-total height: 5176 m

CHARGER/DE CHARGER 3machines

-Dimension of metal sheet : 1500 x 3000mm

-type of material: magnetic

-operation of vertical charging: pneumatic jack

-operation of vertical de charging: pneumatic jack

-course of line: 1 100mm

-speed of horizontal charging: 60m/min

-vertical speed: 60m/min

-Lifting method: charging by suction pads, de charging by conveyor

-time of production change: 45 seconds if there is no change of material

                                           1 min 29 sec if there is a material change

Laser specifications

Type of laser: A CO², infrared

Length of ray: 10,6 µ m, invisible

Power. rapid axial flow

Continuous power: 4kW

Adjusting faze of power: 800 to 4000W

Frequency and size of impulses: 0-1 kHz, 0-100% or 1-2 kHz, 20-100%

Mode of beam: principal component: TEM00

Beam diameter: max 22mm

Power stability: +/- 2%

Composition of laser gas: He, N², CO², mixed gas

Composition of mixed gas: He, N², CO²=balance: 23,4 +/- 10%: 1,7 +/- 0,2%

Consummation of gas: 50 L/hour in continuous functioning

Shutter of beam: mechanic

Other: circular polarization and power measurement

CNC specifications

Numeric command: MAZATROL L32B

CPU: 64bit

No of axis controled: 3 axis, X Y Z, controlled simultaneously with profile follower for Z axis

Programming unit: 0,001 mm for the cut mode, 0,1 mm for the press mode

Programming method: conventional method for the press mode and ISO/EIA for the cut mode

Entering method: MDI key

Enter port: Port RS-232C, speed 9600bauds

Amount of programs: 96 (standard)

Number of programs: number on 4 digits/12 characters for the comments

Motor servo: system servo digital

Position detector: encoder

设 备 图 片

保留对在技术参数和说明中数据的变动和错误的更改的权利。

DCMS 德国二手机械设备销售公司    2005